Two Channel RF Wireless Relay Module with Remote Control is a two channel latching relay module. The output of the module is a passive output and it can be controlled by its 2-button RF wireless controller when the module is powered on. The module comes equipped with suitable remote control. It also can drive most of household electrical appliances.
The output mode of this controller is usually divided into non-lock, interlock, self-locking, non-lock and self-lock coexisting. (Note that you can switch the mode directly without deenergization)
1.Self-lock: connect JP1 and JP2
Press key A, the corresponding relay will be actuated and keeps closed. Press A again, the relay A is disconnected. Press B, the corresponding relay is actuated and keeps closed, press B again, relay B is disconnected.
2.Non- lock: disconnect JP1 and JP2.
Press A, the corresponding relay is actuated and it is disconnected right after you release the key A. relay B works in the same way.
3.Interlock: connect JP1, disconnect JP2
Press A, the corresponding relay will be actuated and keeps closed. When you press B, relay A will be disconnected and relay B is actuated simultaneously and keeps closed.
4.Non-lock and self-lock coexisting: disconnect JP1, connect JP2.
One relay corresponding to the remote controller is in self-lock mode, another is in non-lock mode.
1. Operating voltage: DC12V
2. Static current: ≤100mA
3. Load control: alternating current/direct current
4. Output current: ≤10A
5. Operating frequency: 315MHz
6. Receiver sensibility: -103dbm
7.Operating temperature: -10℃ - +70℃
8. Size: 67*47*17mm
9. Weight:75g(including the remote controller)
10. Remote control distance: 150m (in wide-open area)
1 x 2 Channel Wireless Relay
1 x remote control