XBEE 2mW Wire Antenna S2C, the latest of its kind in Series 2, offers point to multipoint device connectivity with ease, providing cost-effective wireless solutions for electronic devices. They are interoperable with other ZigBee feature set devices, including devices from other vendors.
This version (S2C) of XBee ZigBee Series 2 module utilises EM357 transceiver. The EM357 transceiver is faster, has lower current draw, and has significantly more RAM and Flash. These advanced features allow EM357-based modules to support more network traffic, have more memory for code updates, and operate more efficiently.
These are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. For current customers interested in taking advantage of these performance improvements, the XBee Zibee migration guide will assist with migrating from S2B XBee ZigBee modules to the S2C XBee ZigBee modules.
This XBee module, similar to its predecessors have 2 mm pin spacing. You could use one of our own adapter boards and easy interfacing within any project. If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.
RF Standard: 802.15.4
Frequency (ISM Band): 2.4GHz
Digital I/O: 15
ADC Channels: (4) 10-bit ADC inputs
Data Rate: RF 250 Kbps, Serial up to 1 Mbps
Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
Transmit Power: 3.1 mW (+5 dBm)
Channels: 16 channels
Encryption: 128-bit AES
Voltage requirements: 2.1 to 3.6 VDC
Current requirements: ~33 mA @ 3.3VDC (transmit), ~28 mA @ 3.3VDC (receive), <1 uA @25ºC (sleep)
Communication: CMOS UART / SPI @ ~3.3V
Dimensions: 1.087" L x 0.960" W x 0.16" H (27.61 x 24.38 x 4.06 mm)
Operating temperature range: -40 to +185 °F (-40 to +85 °C)